Olympus UK E-System User Group

Olympus UK E-System User Group (https://e-group.uk.net/forum/index.php)
-   For sale or wanted small ads (https://e-group.uk.net/forum/forumdisplay.php?f=29)
-   -   For sale Panasonic G2 + lens 14-42 (https://e-group.uk.net/forum/showthread.php?t=32240)

cnit 31st March 2014 07:15 AM

Panasonic G2 + lens 14-42
For sale the Panasonic G2 + kit lens 14-42. I am probably buying a Fuji but this kit has to go first.

Price 200 Euros + shipping.

Prefferably shipping within EU. Payment by Paypal. Photos available upon request.

Please contact me by pm for any questions.

Many thanks.

cnit 31st March 2014 12:38 PM

Re: Panasonic G2 + lens 14-42
By the way, does anyone know how to find thw shutter count in this camera?


StephenL 31st March 2014 01:52 PM

Re: Panasonic G2 + lens 14-42

Originally Posted by cnit (Post 286822)
By the way, does anyone know how to find thw shutter count in this camera?


This may help:


cnit 1st April 2014 06:20 PM

Re: Panasonic G2 + lens 14-42
Many thanks Steven,

For some odd reason I can't get it to work. Nor any other procedures I have seen suggested elsewere. is it that difficult? or am I doing something wrong?

I managed to do it right from the start for my E-400 and E-1...

StephenL 1st April 2014 06:38 PM

Re: Panasonic G2 + lens 14-42
Sorry, I no longer have any Panasonics. I just found this on t'internet.

cnit 1st April 2014 07:42 PM

Re: Panasonic G2 + lens 14-42
No worries,

I actually managed to find one that works and it is located here for anyone interested:


The incorrect procedure is probably for another model (it says press film mode and left arrow together, but they are the same button on the G2)

the correct sequence is this one:

For G2: To enter the TEMPORARY Service mode (there also exists PERMANENT service mode) do the following:

1. Make sure you have a memory card in the camera.
2. Set the Drive mode lever to Single position
3. On a TURNED OFF camera push DISPLAY and AF/AE LOCK buttons simultaneously. While holding these two buttons turn on the power. Now the camera should be in the temporary service mode. To make sure it is, enter the Setup menu (the one marked with "wrench" icon) and look at the very last page. In the service mode there will be a new item ROM BACKUP. This item is for saving the user settings to and restoring them from a memory card.
4. Push simultaneously LEFT ARROW and MENU/SET buttons. A menu can pop up or some settings show - don't pay attention to that now. While holding these two buttons push AF/AE LOCK. You can now release all three buttons. The screen will now show a table with the last 16 error codes and their dates. Table navigation is done with the arrow buttons. Error codes are explained in the Service Manual.
5. Repeat the actions from item 4 once more. Now you will see CAMERA INFO screen. There is the most interesting info: VER: full software revision number No.: motherboard's serial number PWRCNT: Number of power on cycles (including exits from the Sleep mode) SHTCNT: Number of shutter activations STBCNT: Number of flash activations
6. If you now push DISPLAY button you will see CAMERA INFO 2 screen. There are several more counters there: Total number of clock settings (ClockSet Cnt), and two more (UnderCut Cnt ? RTC Read Err).
7. By repeating actions from item 4 return the camera into the initial state. The camera can work as usual despite it is still in the service mode. Complete exit from the service mode is done when the camera is powered down.

cnit 4th April 2014 10:35 PM

Re: Panasonic G2 + lens 14-42
The kit was sold outside of the forum.

Olympus E1 and Sigma 30 mm f1.4 still available.


All times are GMT. The time now is 12:45 AM.

The Write Technology Ltd, 2007-2019, All rights reservedAd Management plugin by RedTyger