Announcement

Collapse

December's CHALLENGE

The topic to inspire your creative juices this month is BOXES Please don't forget to vote on November's LEAVES challenge and please re-vote if you already did but before the recent forum upgrade.

See more
See less

Olympus 1.4 mc 14

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Olympus 1.4 mc 14

    http://www.wingsofnature.org

  • #2
    Re: Olympus 1.4 mc 14

    Apparently a common problem, I had mine loosen off and caught them before I lost one, but it was close...

    Edit: If you're going to the Photography show, the repair/cleaning service may be able to help you!
    I didn’t get where I am today....

    Comment


    • #3
      Re: Olympus 1.4 mc 14

      Just checked mine and they are all nice and tight. Perhaps they forgot to put some lock tight on the threads when they were assembling a batch.
      Dave

      My Flickr

      Comment


      • #4
        Re: Olympus 1.4 mc 14

        Not sure exactly what you need to replace - I had a couple of tiny screws disappear from my laptop. I hunted in vain for the specific ones I needed but ended up buying a job lot of all sorts from eBay.
        If you search for Laptop screws you'll find lots of listings.


        If you have a specific size e.g M2 x 4mm I'd be happy to trawl through and see if I can help.
        https://www.flickr.com/photos/amcuk/

        Comment


        • #5
          Re: Olympus 1.4 mc 14

          Originally posted by Walti View Post
          Apparently a common problem, I had mine loosen off and caught them before I lost one, but it was close...

          Edit: If you're going to the Photography show, the repair/cleaning service may be able to help you!
          Thanks for the idea but alas decided not to go I case I submit to the new x

          Kind regards mike
          http://www.wingsofnature.org

          Comment


          • #6
            Re: Olympus 1.4 mc 14

            Originally posted by AMc View Post
            Not sure exactly what you need to replace - I had a couple of tiny screws disappear from my laptop. I hunted in vain for the specific ones I needed but ended up buying a job lot of all sorts from eBay.
            If you search for Laptop screws you'll find lots of listings.


            If you have a specific size e.g M2 x 4mm I'd be happy to trawl through and see if I can help.
            http://www.wingsofnature.org

            Comment


            • #7
              Re: Olympus 1.4 mc 14

              Just a thought, if the screws are tiny ... would something from an old pair of glasses fit?

              You could also look at any number of other items to see if you can 'borrow' a screw which would not be missed like one holding a circuit board in place or from any other electrical item.

              edit to say ... Make sure the thread is right, you could take one out of the MC14 to try carefully in the hole you took the trial screw from so you are not in danger of messing the thread on the MC14.

              Comment


              • #8
                Re: Olympus 1.4 mc 14

                It does seem to be a strangely common problem. This link is to a blog by Panasonic Luminary Daniel J Cox who had the problem with his MC-14 (scroll down to the section on the 300mm f4). Not unsurprisingly it has affected his opinion of Olympus' build quality ever since.

                I must check mine sometime and I hope you manage to get your problem solved without too much expense Mike.

                Ron

                Comment


                • #9
                  Re: Olympus 1.4 mc 14

                  Historically, the Japanese camera industry used JIS (Japanese Industry Standard) screws. However, I have removed one screw from my own MC14 and the thread seems to match metric ISO M2. Unfortunately, there is a snag. The screws used in lenses always seem to have very small heads and the heads on standard M2 are too big to fit into the countersinking on the MC14 flange. I found one screw in my box that seemed to fit but that was a slotted head countersunk screw not cross headed.

                  Mark

                  Comment


                  • #10
                    Re: Olympus 1.4 mc 14

                    Originally posted by Mark_R2 View Post
                    Historically, the Japanese camera industry used JIS (Japanese Industry Standard) screws. However, I have removed one screw from my own MC14 and the thread seems to match metric ISO M2. Unfortunately, there is a snag. The screws used in lenses always seem to have very small heads and the heads on standard M2 are too big to fit into the countersinking on the MC14 flange. I found one screw in my box that seemed to fit but that was a slotted head countersunk screw not cross headed.

                    Mark
                    http://www.wingsofnature.org

                    Comment


                    • #11
                      Re: Olympus 1.4 mc 14

                      Originally posted by Olybirder View Post
                      It does seem to be a strangely common problem. This link is to a blog by Panasonic Luminary Daniel J Cox who had the problem with his MC-14 (scroll down to the section on the 300mm f4). Not unsurprisingly it has affected his opinion of Olympus' build quality ever since.

                      I must check mine sometime and I hope you manage to get your problem solved without too much expense Mike.

                      Ron
                      http://www.wingsofnature.org

                      Comment


                      • #12
                        Re: Olympus 1.4 mc 14

                        Originally posted by Keith-369 View Post
                        Just a thought, if the screws are tiny ... would something from an old pair of glasses fit?

                        You could also look at any number of other items to see if you can 'borrow' a screw which would not be missed like one holding a circuit board in place or from any other electrical item.

                        edit to say ... Make sure the thread is right, you could take one out of the MC14 to try carefully in the hole you took the trial screw from so you are not in danger of messing the thread on the MC14.
                        http://www.wingsofnature.org

                        Comment


                        • #13
                          Re: Olympus 1.4 mc 14

                          Whenever an item of camera gear I have dies, I always keep as many of the tiny screws as I can recover. Goodness knows why but I have been doing this for years and have loads of them.
                          Dave

                          E-M1 Mk2, Pen F, HLD-9, 17, 25, 45, 60 macro, 12-40 Pro, 40-150 Pro, 12-50, 40-150, 75-300, MC-14, MMF-3 (all micro 4/3rds), 7-14 (4/3rds), 50, 135 (OM), GoPro Hero 3, Novo/Giottos/ Manfrotto supports. Lowepro, Tamrac, Manfrotto, and Billingham bags.

                          External Competition Secretary, Cwmbran PS & Welsh Photographic Federation Judge

                          Comment


                          • #14
                            Re: Olympus 1.4 mc 14

                            Originally posted by Mdb2 View Post
                            Their excuse that my mc14 was not a lens, or camera, so wasn’t covered by my Olympus pro cover warranty. I am tempted to send them the link you gave me.
                            You should be able to find a few more links as I've seen this fault reported a few times before. I would send them the links and point out that as you are paying for Pro cover they should deal with this as a known fault. All you are asking for is a checkup and 1 screw!

                            Found another link:
                            https://www.mu-43.com/threads/odd-e-...d-mc-14.89780/
                            Andy
                            bengeo.com

                            Comment


                            • #15
                              Re: Olympus 1.4 mc 14

                              If the replacement screw is too long, don't forget to put a nut on it before you cut it down, chamfer and deburr it.

                              Jim

                              Comment

                              Working...
                              X