Announcement

Collapse

December's CHALLENGE

The topic to inspire your creative juices this month is BOXES Please don't forget to vote on November's LEAVES challenge and please re-vote if you already did but before the recent forum upgrade.

See more
See less

It's probably something bloody obvious - FL50R issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • It's probably something bloody obvious - FL50R issue

    It is probably something blindingly obvious but I'm having a bit of trouble with my FL50R over the last couple of days and wondered if anything has some suggestions to the cause.

    The scenerio is, got my FL50R with fully recharged batteries in TLL Auto mode fitted in the hotshoe on either my E-3 or E-PL1 and when I take a image it is totally underexposed (totally as it's nearly black). The flash is firing when fully depressing the shutter release, so there is no reason for it not to illuminate the scene. Initial I thought I might have accidentially changed a setting on the E-3, but I've reset it to factory settings and tried my E-PL1 which has the same issue.

    If I put the flash into manual an dial in approximately the right power the images come out fine. So by deduction I can only imagine that it's a issue with the flash and the communications from the camera although not at the camera end as there is the same issue on both bodies. Could it be out of sync firing the flash slightly too early?

    If I use my FL36R, I have no troubles at all and everything comes out perfectly.

    I'm not a particularly heavy user on my flash, although it's probably fired several hunderd times over the last 18 months.

    Anyone with any ideas?

    Simon

  • #2
    Re: It's probably something bloody obvious - FL50R issue

    Maybe this will help:

    http://forum.fourthirdsphoto.com/showthread.php?t=19507

    Jim

    Comment


    • #3
      Re: It's probably something bloody obvious - FL50R issue

      Originally posted by The Saint View Post
      It is probably something blindingly obvious but I'm having a bit of trouble with my FL50R over the last couple of days and wondered if anything has some suggestions to the cause.

      The scenerio is, got my FL50R with fully recharged batteries in TLL Auto mode fitted in the hotshoe on either my E-3 or E-PL1 and when I take a image it is totally underexposed (totally as it's nearly black). The flash is firing when fully depressing the shutter release, so there is no reason for it not to illuminate the scene. Initial I thought I might have accidentially changed a setting on the E-3, but I've reset it to factory settings and tried my E-PL1 which has the same issue.

      If I put the flash into manual an dial in approximately the right power the images come out fine. So by deduction I can only imagine that it's a issue with the flash and the communications from the camera although not at the camera end as there is the same issue on both bodies. Could it be out of sync firing the flash slightly too early?

      If I use my FL36R, I have no troubles at all and everything comes out perfectly.

      I'm not a particularly heavy user on my flash, although it's probably fired several hunderd times over the last 18 months.

      Anyone with any ideas?

      Simon
      Simon, having not read the above link to the thread, the only thing i can think of is that you have your flash set to remote wireless?? the flash fires but only to communicate with the `slave` ????

      Comment


      • #4
        Re: It's probably something bloody obvious - FL50R issue

        Hi Simon

        Couple of things I have come across;

        1) Check the flash contact pins are clean and move freely.

        2) I recently had problems with an FL50 where is was being triggered before fully charged. This caused under exposures. If you let flash gun charge for 20-30 seconds after orange ready light shines it worked fine. Unfortuntely I had to send mine to Olympus for repair.

        Gary


        regards

        Gary

        Comment


        • #5
          Re: It's probably something bloody obvious - FL50R issue

          Thanks for the suggestions.

          I've checked the settings in the article and there appears to be nothing wrong. The pins are clean and appear to be making contact.

          What is also interesting if the flash is set to auto rather than TTL, it over exposes,so I'm guessing its an electronic fault.

          Guess I'm going to have to dig the receipt out for it and send it back. I assume flashes have the same 2 yr warranty.

          Simon

          Comment

          Working...
          X