Olympus UK E-System User Group
Olympus UK E-System User Group

Join our unique resource for Olympus Four Thirds E-System DSLR and Pen and OM-D Micro Four Thirds photographers. Show your images via our free e-group photo gallery. Please read the e-group.uk.net forum terms and conditions before posting for the first time. Above all, welcome!


Go Back   Olympus UK E-System User Group > Cameras, lenses and system accessories > Lens focus > Converters, adapters and extension tubes

Converters, adapters and extension tubes All those lens accessories that get in between the lens and the camera.

Reply
 
Thread Tools Display Modes
  #1  
Old 14th December 2018
Harold Gough Harold Gough is offline
Full member
 
Join Date: Oct 2014
Location: Reading UK
Posts: 5,566
Thanks: 56
Thanked 769 Times in 702 Posts
Likes: 38
Liked 3,030 Times in 1,636 Posts
A Light Leak Problem Diagnosed

I have an A7R full frame camera which I rarely use. I have lenses in Nikon AI mount for which I have an adapter for AI to Sony E. It is relevant that I was shooting macro but not relevant that I was using this particular lens.

I had noticed that the lens was a bit loose in the mount but proceeded with the shoot.

I was working on a table. My Nissin flash units for the A7R were freestanding, one on either side of the lens, behind the front of the lens, such that this was not a flare problem from light shining on the front element. I started noticing lack of contrast and the curved shape at the top right.

I was using the camera hand-held and shooting from a variety of angles while the flash guns were fairly static, giving variation in the effect.

What was happening was that the spring in the mount was pushing one side of the lens forward and allowing light behind it. When I realised this I cured it by holding the lens tight against the mount by pressure from my supporting hand I now have a new mount!

The images are uncropped and treated identically. I have remove some, but not all, sensor dust. (The good versions will be uploaded in a topic in the near future).

I have chosen the example images for the way they demonstrate the light leak rather than for being what would otherwise have been good enough to post.

I suspect that this would have been less easy to diagnose on a crop sensor, as the sharp, curved edge would have been outside the frame.

I hope this helps someone.

Harold







__________________
The body is willing but the mind is weak.
Reply With Quote
The Following 2 Users Say Thank You to Harold Gough For This Useful Post:
MikeOxon (14th December 2018), Ulfric M Douglas (14th December 2018)
The Following User Liked This Post:
Jim Ford (14th December 2018)
  #2  
Old 14th December 2018
Ricoh Ricoh is offline
Full member
 
Join Date: Apr 2014
Location: Lancashire
Posts: 5,792
Thanks: 592
Thanked 421 Times in 373 Posts
Likes: 787
Liked 1,919 Times in 1,143 Posts
Re: A Light Leak Problem Diagnosed

Light leaks with film can look pretty cool, but digital looks bloody awful.

I've been thinking of ways to flash the film edge prior to running it through the camera. I'm sure I'll come up with a Dragon Den's solution, then the villa in the sun.
__________________
Steve

on flickr
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Odd problem KeithL Olympus Pen E-PL7 9 29th September 2017 07:28 PM
Foolproof Leak Repair: Masterclass Harold Gough The lounge 2 28th February 2017 09:43 PM
SOLVED Light Room 5.3 Problem Graham_of_Rainham Software 11 19th December 2013 03:15 PM
Problem with L 3 sapper Software 6 13th February 2011 02:41 PM
SOLVED E3 problem Melaka Olympus E-3 11 20th October 2009 10:45 AM


All times are GMT. The time now is 05:52 PM.


The Write Technology Ltd, 2007-2019, All rights reservedAd Management plugin by RedTyger