View Single Post
  #5  
Old 27th July 2012
Ross the fiddler's Avatar
Ross the fiddler Ross the fiddler is offline
Full member
 
Join Date: Apr 2010
Location: Blue Mtns, NSW Australia
Posts: 13,788
Thanks: 2,024
Thanked 1,303 Times in 1,018 Posts
Likes: 5,288
Liked 1,944 Times in 1,080 Posts
Re: Can't get FL-50 to fire on E-M5

Quote:
Originally Posted by jdal View Post
The flash fires when it's being inserted into the camera, it doesn't do that when I stick it in the E-P3. Attaching via a TTL cord has no effect - everything stays the same. The flash fires when I slide in the camera end into the hotshoe. I did notice that the little flash has a projecting pin right at the front, and no other pins whereas the FL50 has a tiny flat metal contact in that position, and the usual TTL pins.

It sounds like something is shorting out here
Your FL50 has a pin that locates in the locking position when the thumbwheel is wound down (which is what the "tiny flat metal contact in that position" is). This needs to be fully wound up to allow it to go in all the way before hand. Could this be the problem? BTW, the flash should be OFF when inserting into the camera, otherwise it might corrupt its data connection.
__________________
Ross
I fiddle with violins (when I'm not fiddling with a camera).
Flickr: https://www.flickr.com/photos/ross-the-fiddler/
Cameras: OM-D E-M1 & Mk II, Olympus Stylus 1, OM-D E-M5.
Lenses: M.ZD12-40mm f2.8 PRO Lens, M.ZD40-150mm f2.8 PRO Lens with MC-14, M.ZD12-50, M.ZD60 Macro, M.ZD75-300 Mk II, MMF-3, ZD14-54 II, Sigma 150mm F2.8 APO Macro DG HSM.
Flashes: FL36R X2, FL50R, FL50.
Software: Capture One Pro 10 (& Olympus Viewer 3).
Reply With Quote