View Single Post
  #12  
Old 14th July 2018
Antonio Correia's Avatar
Antonio Correia Antonio Correia is offline
Full member
 
Join Date: Sep 2015
Location: Setúbal - Portugal
Posts: 90
Thanks: 11
Thanked 9 Times in 5 Posts
Likes: 4
Liked 98 Times in 40 Posts
Re: Ready made setting for Olympus OM-D EM-5 Mark II

Chris I am here again
iAUTO as written on the label has the following settings.
I called it Reset. Why ?
Sometimes I change some settings in A (Aperture Priority) at wish. I comes to a point that they are no more useful because the situation has changed or other reason.
Then I change the dial mode to iAUTO and I am back to the reset point.
Obviously that not all the settings are customisable but for the most used ones the procedure usually works.

Another note. After working with the aperture mode and making the change of the necessary settings (like changing from the silent mode so the flash can be fired for example or changing the aperture as the lens you are working with is 1.2) I go to Myset4 and save that setting.
This allows me to work consistent and comfortably.
If I did not explain myself correctly do not hesitate to ask whatever you wish.

But since you do not have the 5II but the 10, perhaps the same procedures can be applied with the buttons

Thank you for your attention !

Reply With Quote