Olympus UK E-System User Group

Olympus UK E-System User Group (http://e-group.uk.net/forum/index.php)
-   Olympus OM-D E-M1 Mark II (http://e-group.uk.net/forum/forumdisplay.php?f=73)
-   -   Help needed please (please!!) with card slot settings (http://e-group.uk.net/forum/showthread.php?t=47830)

Athene 6th May 2018 12:33 PM

Help needed please (please!!) with card slot settings
 
Hi,

I'm trying to set up my cards (EM1 mk2) with RAW to slot 1 & Jpeg to slot 2, I can do it but when I turn off and turn on the camera the settings have changed.

I've tried every configuration of save settings, formatted the cards, latest firmware update etc. but it just will not work for me.

As I say every thing looks fine until I power off and turn the camera back on - and the settings have changed.

hope someone can help, Gary

Walti 6th May 2018 01:21 PM

Re: Help needed please (please!!) with card slot settings
 
Are you using PASM or one of the C's?

If you are using PASM then this should work as you've described.

If you are using C1, 2 or 3 then you have to individually save the requirement to each custom setting mode.

Paul

Athene 6th May 2018 01:24 PM

Re: Help needed please (please!!) with card slot settings
 
Thanks so much ! Yes I've got it working now - I was using it on the C1 menu - I knew it must be something simple.
Thanks again

blu-by-u 7th May 2018 05:25 AM

Re: Help needed please (please!!) with card slot settings
 
On that setting, I cannot seem to be able to get the OiShare to transfer the JPG to my Android device. Anyone care to explain.


All times are GMT. The time now is 09:09 AM.


The Write Technology Ltd, 2007-2019, All rights reservedAd Management plugin by RedTyger