PDA

View Full Version : Metz 45 cl-1


ardvorlich
30th December 2009, 08:56 AM
Does anyone know if it's possible to use the above flash with E system cameras specificly the E-620 a pro relative (daughter-in -law) is having a clearout and has given me Metz 45,an epson 2100 printer,epson scanner,and an assortment of filters.I would be interested if anyone has any info on the flash.
Regards Iain

BobS
9th January 2010, 09:13 PM
Hi Iain

I believe that it is most important that the trigger voltage of the unit is not too high for the camera which will fry its innards.

Try the following link www.botzilla.com/photo/strobeVolts.html which gives these voltages for many makes of flashguns. I have several Minolta guns that I am building up the courage to try!

I don't know whether you will get TTL operation with any flashgun that is not dedicated to Olympus cameras. Apart from Olympus, Metz do a couple, I believe.

Good luck
Bob

jamie allan
10th January 2010, 03:21 PM
Iain,
I don't know if this helps.

http://www.the-meissners.org/olympus-flash2.html


Jamie