PDA

View Full Version : EM-1 MkII freezing when using live bulb and live timer


Clockwork Donkey
19th May 2017, 09:51 PM
Has anyone else experienced this since the new firmware update?.

The image builds on the screen fine but when the shutter closes either by releasing the button or pressing it again dependent on mode, the screen goes black with the histogram showing bottom left and the display count and exposure time bottom right. The only way I can get the camera to rspond to any button or the off switch is to remove the battery. No image is saved.

This could be a new glitch.

pault
20th May 2017, 04:21 AM
Have you got "noise reduction switched On"? If yes try with set to Off
My camera seems to work fine
Hope this helps

Clockwork Donkey
20th May 2017, 07:18 AM
Have you got "noise reduction switched On"? If yes try with set to Off
My camera seems to work fine
Hope this helps
Thanks for the reply. My noise reduction is switched off. It was the first thing I checked when the issue arose.

Growltiger
20th May 2017, 09:32 AM
Works perfectly here. Try removing and replacing lens. Try another lens.

Clockwork Donkey
20th May 2017, 10:19 AM
Works perfectly here. Try removing and replacing lens. Try another lens.
This forum is populated with very knowlegeable folk. Thanks for this I had not considered dirty contacts. A quick clean and all is well.*chr

Growltiger
20th May 2017, 11:36 AM
This forum is populated with very knowlegeable folk. Thanks for this I had not considered dirty contacts. A quick clean and all is well.*chr
I'm glad to hear that solved it.

drmarkf
20th May 2017, 02:45 PM
I've lost count of the times over the years the great people here have solved a problem or taught me something useful!