PDA

View Full Version : Indoor and Outdoor flash on E1


Haisbro
1st March 2008, 08:27 AM
These are settings i used in the above circumstances for weddings. They may be of interest to users.

E1 and FL50

Indoor

Auto flash (no symbol)
ESP
"A" for Aperture on camera
ISO Auto
Set flash to TTL Auto


Outdoor

Set flash to fill (lightning symbol)
ESP
'P'
White balance auto
ISO Auto
No exposure compensation
Set flash to FP TTL Auto by mode button flash.

Always experiment before use

David

ndl0071
1st March 2008, 09:02 AM
Hi, Thanks for posting your observations just getting to grips with the E1 & FL36 combo so this post may come in handy.

Cheers
Neil

Haisbro
1st March 2008, 09:14 AM
Hi, Thanks for posting your observations just getting to grips with the E1 & FL36 combo so this post may come in handy.

Cheers
Neil
The info was for FL50 not sure if applicable to FL36

David

Pjphoto59
1st March 2008, 01:40 PM
These are settings i used in the above circumstances for weddings. They may be of interest to users.

E1 and FL50

Indoor

Auto flash (no symbol)
ESP
"A" for Aperture on camera
ISO Auto
Set flash to TTL Auto


Outdoor

Set flash to fill (lightning symbol)
ESP
'P'
White balance auto
ISO Auto
No exposure compensation
Set flash to FP TTL Auto by mode button flash.

Always experiment before use
David

I use the same settings as these. I know you were talking about weddings, but for more general outdoor scenes with traffic, fairground rides etc. the E1 flash setting can be changed to "slow" or usually better "slow 2nd curtain".